Skip to content
January 28, 2016 / apexprecitech

Apex Top Arm Load Gauge now totally “compact spinning”compatible

The Apex Top Arm Load Gauge has got better. Recently we added a new feature by which our gauge has become the first to measure the loads in the compacting rollers of compact spinning drafting.

We experimented with Suessen Elite compact spinning drafting. So far , we had only given arbors to measure the second roller which is actually held in the saddle. But, this present arbor is in fact, as assembly of a normal top roller and the plastic casing from the original compact dtafting. See the picture below.

This assembly was held in the arbor of a Suessen Elite drafting, and the arm pressed to exert load. We got the loads from 5 to 6 kilograms as anticipated by us. This was when the front roller load was about 25 kilograms.  See the below picture.



Leave a Reply

Please log in using one of these methods to post your comment: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: